Skip to content
Header - Entec Voortstuwers

Aerostrip® Type T

Image is not available

Het homogeniseren en in beweging houden van vloeistoffen met een laag energieverbruik!

Het homogeniseren en in beweging houden van vloeistoffen met een laag energieverbruik!

Reliable products from our partner AquaConsult, offered by Entec Holland.

Header - Entec Voortstuwers
Shadow
Aerostrip® Type T

As can be read in detail on our ‘Why Aerostrip®’ page, Aerostrip® was developed by our partners AquaConsult in Austria. They have worked for over 25 years on various products, including Type T. This means you can always count on Aerostrip® because of their extensive knowledge and experience.

We at Entec can advise you on all products. If you have any questions based on the information on our pages, we will be happy to help you by contacting us or requesting a call back!

An experienced colleague will then contact you to answer all your questions!

THE stainless steel aerator for your applications!

The Type T Aerostrip was released some time ago as an improvement on the then current plate aeration. The idea of the rectangular strip came into being because the “cumbersome” plates of approximately 1×2 meters could in many cases not be optimally distributed in the tank. This means you unnecessarily compromise on efficiency, not to mention any difficulties with installation and transport.

The Type T Aerostrip is made of stainless steel and delivers the oxygen to the tank at an extremely low distance from the bottom (approx. 2 cm). Because this aerator is made of stainless steel, it offers excellent resistance to water and air flows with high temperatures. The Type T Aerostrip has a top connection. In exceptional cases, this aerator can also be equipped with a bottom connection, usually this is the case with a high coverage ratio and/or retrievable system.

Aerostrip – Type T
Aerostrip – Type T
Aerostrip® manufacturing
The Aerostrips are completely assembled in Austria, where the frame is made and the membrane is secured. The membrane is made of high-quality PU (Polyurethane) because of the advantages this brings. PU, unlike conventional EPDM membranes, does not lose its elastic character over time, meaning that the efficiency of the Aerostrip remains virtually constant over its lifespan. Each membrane is provided with extremely small perforations and each one undergoes a pressure test. The Aerostrips are each provided with a unique serial number, making the entire production process transparent and quality can be guaranteed at all times. Aerostrip aeration systems can be designed as a fixed system or as a retractable system.

In addition to the common membranes, there are also membranes that are specifically designed for higher flux rates and/or industrial applications where clogging of membranes is a greater risk than with municipal wastewater. These membranes go through life as “Phoenix membranes”. This addition ensures that the Aerostrips can provide a perfect solution even for difficult situations.

If all that isn’t enough, the Aerostrip has a lifespan of up to 20 years with an average of 15 years! This is easily twice as long as conventional dish and tube aeration.
Aerostrip® Type T specifications

The Type T Aerostrip was released some time ago as an improvement on the then current plate aeration. The idea of the rectangular strip came into being because the “cumbersome” plates of approximately 1×2 meters could in many cases not be optimally distributed in the tank. This means you unnecessarily compromise on efficiency, not to mention any difficulties with installation and transport.

The Type T Aerostrip is made of stainless steel and delivers the oxygen to the tank at an extremely low distance from the bottom (approx. 2 cm). Because this aerator is made of stainless steel, it offers excellent resistance to water and air flows with high temperatures. The Type T Aerostrip has a top connection. In exceptional cases, this aerator can also be equipped with a bottom connection, usually this is the case with a high coverage ratio and/or retrievable system.

 

TypeL
mm
Weight
kg
Aeration surface
Permissible air demand
Nm³/h
Optimal range
Nm³/h
T1,0-1810003,20,180 - 21,01,8 - 14,0
T1,5-1815004,80,260 - 31,52,6 - 21,0
T2,0-1820006,20,350 - 42,03,5 - 28,0
T2,5-1825007,70,440 - 52,54,4 - 35,0
T3,0-1830009,10,530 - 63,05,3 - 42,0
T3,5-18350010,60,610 - 73,56,1 - 49,0
T4,0-18400012,10,700 - 84,07,0 - 56,0
Base plateEdelstahl (1.4571 / 1.4404)
FrameEdelstahl (1.4571 / 1.4404)
MembranePolyurethane (PUR)
Air connection ØG1“a lt. DIN 228-1
Air connection materialEdelstahl (1.4571 / 1.4404)
Hex nut materialEdelstahl (1.4401)
Sealing ringSBR
Other Aerostrip® Type T Specifications

 

Product images

Here you will find some product images. We also offer photos of projects and implementations. You can click on the photo for an enlarged view.

Download the brochure!

We proudly offer the Aerostrip® Type T brochure. You can download this easily and without obligation via the download button below. If you have any questions regarding our information or the brochure, you can contact us by telephone or email!